Platform Skirts
PLATFORM SKIRTS are large rectangular or square bellows typically constructed from reinforced vinyl and mounted around a lift table to resist entrance of foreign objects into the area under the table. They also prevent accumulation of dirt and debris on equipment mounted under the table. They may be constructed to protect from one to four sides of the table.

 Square or Rectangular Four (4) Sides

See End Conditions Chart for End Conditions

 Square or Rectangular Three (3) Sides

See End Conditions Chart for End Conditions

Square or Rectangular Two (2) Sides

If your bellows only needs plain ends the information in line "F" through "M" below is not required.

Bellows Options at bottom of the form below.

Fill In form below and submit to IBC for quote or order by clicking on the submit button at the bottom of form.

Form #P-500

Item

Bellows Description

Dimension

A

Outside Skirt Bellows

B

Outside Skirt Bellows

C

Extended Height Skirt Bellows

D

Minimum Closed Height (Folded Length)
See Closed Length Calculator

Boot End Conditions

Left End

Right End

E

Boot End Condition Type

See End Conditions Chart for information

F

Collar/Cuff Length

J

Flange Outside Height

K

Flange Outside Width

L

Flange Inside Height

M

Flange Inside Width

N

Collar/Cuff Height

P

Collar/Cuff Width

A1

Internal Flange Outside Height

B1

Internal Flange Outside Width

Boot Material Selection

See Materials Specification Chart

Item

Optional Equipment

Select

1

Tie Strips Between Convolutions 
Tie strips run the entire length of the boot and do not increase the closed length of the boot.

2

Zipper (Full length of boot) 
Internal Guides must be split if zipper is used.

3

Internal Convolution Stiffener Rods Normally placed every other convolution. The closed height ("D") will increase with the use of rods.

4

Clamping Bars for Collar/Cuff
Normally 1/8" thick steel

5

IBC Boot Name Tag (Sewn into boot)

6

Back-up End Flange (For Flange Type End Conditions)

Choose Material

Back Up Flange Mounting

All back up metal flange material is 1/16" thick unless specified otherwise in comment section below.


All back up flanges are furnished loose unless specified otherwise.


All back up flanges are furnished less mounting holes unless specified otherwise.

Order Information
*required fields

*Company Name

*Contact Name

Customer Purchase Order #

Quantity of Bellows Required

Date Bellows Needed

Bill to Address


*Address
*City

*State

*Zip

 

Ship to Address

Same as above


*Address
*City

*State

*Zip

 

*Phone

Fax

*E-Mail

Additional Comments

Add any additional comments in the box below.

 


 

 [bellow_pic_menu.htm]