Round Boot Drawings
End Conditions
Holes shown in flange end conditions are to be added by customer unless otherwise specified.

Optional back up metal or plastic flanges can be provided.

Collar End Condition #RD001

"E" = Inside Diameter of Collar     "F" = Collar Length 

Round External Flanges #RD002

"G" = Outside Diameter of Flange

"H" = Inside Diameter of Flange

Round Internal Flanges #RD003

"G" = Outside Diameter of Flange

"H" = Inside Diameter of Flange

Round Flange with Round Cuff #RD004

"E" = Inside Diameter of Collar     "F" = Collar Length

"G" = Outside Diameter of Flange

Square or Rectangle Flange #RD005

"J" = Outside Flange Height     "K" = Outside Flange Width 

"L" = Inside Flange Height     "M" = Inside Flange Width

Round Flange with Square or Rectangle Inside #RD006

"G" = Outside Flange Diameter     "L" = Inside Flange Height "M" = Inside Flange Width

Round Flange with Square or Rectangle Cuff #RD007

"G" = Outside Flange Diameter
"L" = Inside Flange/Collar Height
"M" = Inside Flange/Collar Width     "F" = Cuff Length"

Square Flange with Round Cuff #RD008

"E" = Inside Cuff Diameter     "F" = Cuff Length

"J" = Flange Height     "K" = Flange Width

Square Flange with Square Cuff #RD009

"F" = Cuff Length     "J" = Outside Flange Height

"K" = Outside Flange Width     "L" = Inside Flange Height

"M" = Inside Flange Width

Square or Rectangular Cuff #RD010

"F" = Cuff Length     "N" = Cuff Height     "P" = Cuff Width