Slide & Way Covers
C-SHAPED covers are available in almost any size or material to meet a variety of applications or environments. They typically incorporate plastic stiffeners that configure to the shape of the rail they are protecting. This allows them to be mounted vertically or in other positions where maintaining the correct position would otherwise be difficult.

Boot bellows shown below with Plain End Conditions. 

If your bellows only needs plain ends the information in line "J" through "B1" below is not required.

Bellows Options at bottom of the form below.

Fill In form below and submit to IBC for quote or order by clicking on the submit button at the bottom of form.

Form #C400

Item

Bellows Description

Dimension

A

Outside Bellows Height (30" Max)*

A1

Inside Bellows Height (3/4" Min.)*

B

Outside Bellows Width (30" Max)*

B1

Inside Bellows Width (3/4" Min.)*

B2

Inside Bellows Ends Width

C

Maximum Open Height (Extended Length)

D

Minimum Closed Height (Folded Length)
See Closed Length Calculator

 

*Note: Must maintain no less than 1" difference between A & A1 and B & B1.

 

Boot End Conditions

Left End

Right End

E

Boot End Condition Type

See End Conditions Chart for information

J

Flange Outside Height 
(Outside type flange only)

K

Flange Outside Width 
(Outside type flange only)

L

Flange Inside Height

M

Convolution Width

N

Flange Inside Ends Width 

P

Flange Inside Ends Height 

A1

Flange Outside Height  
(Inside Type Flange Only)

B1

Flange Outside Width  
(Inside Type Flange Only)

Boot Material Selection

See Materials Specification Chart

Item

Optional Equipment

Select

1

Tie Strips Between Convolutions  
Tie strips run the entire length of the boot and do not increase the closed length of the boot.

2

Convolution Stiffener

Normally used every other convolution. If not, specify number required and spacing from the bellows end to the first stiffener.

3

IBC Boot Name Tag (Sewn Into Boot)

4

Back-up End Flange (For Flange Type End Conditions)

Choose Material

Back Up Flange Mounting

All back up metal flange material is 1/16" thick unless specified otherwise in comment section below.


All back up flanges are furnished loose unless specified otherwise.


All back up flanges are furnished less mounting holes unless specified otherwise.

Order Information
*required fields

*Company Name

*Contact Name

Customer Purchase Order #

Quantity of Bellows Required

Date Bellows Needed

Bill to Address


*Address
*City

*State

*Zip

 

Ship to Address

Same as above


*Address
*City

*State

*Zip

 

*Phone

Fax

*E-Mail

Additional Comments

Add any additional comments in the box below.

 

[bellow_pic_menu.htm]